3D Palmprint Recognition Using Dempster-Shafer Fusion Theory

This paper proposed a novel 3D palmprint recognition algorithm by combining 3D palmprint features using D-S fusion theory. Firstly, the structured light imaging is used to acquire the 3D palmprint data. Secondly, two types of unique features, including mean curvature feature and Gaussian curvature feature, are extracted. Thirdly, the belief function of the mean curvature recognition and the Gaussian curvature recognition was assigned, respectively. Fourthly, the fusion belief function from the proposed method was determined by the Dempster-shafer (D-S) fusion theory. Finally, palmprint recognition was accomplished according to the classification criteria. A 3D palmprint database with 1000 range images from 100 individuals was established, on which extensive experiments were performed. The results show that the proposed method 3D palmprint recognition is much more robust to illumination variations and condition changes of palmprint than MCR and GCR. Meanwhile, by fusing mean curvature and Gaussian curvature feature, the experimental results are promising (the average equal error rate of 0.404%). In the future, imaging technique needs further improvement for a better recognition performance

A mechanochemical synthesis of submicron-sized Li2S and a mesoporous Li2S/C hybrid for high performance lithium/sulfur battery cathodes

Lithium sulfide, Li2S, is a promising cathode material for lithium–sulfur batteries (LSBs), with a high theoretical capacity of 1166 mA h g−1. However, it suffers from low cycling stability, low-rate capability and high initial activation potential. In addition, commercially available Li2S is of high cost and of large size, over ten microns, which further exacerbate its shortcomings as a sulfur cathode. Exploring new approaches to fabricate small-sized Li2S of low cost and to achieve Li2S cathodes of high electrochemical performance is highly desired. This work reports a novel mechanochemical method for synthesizing Li2S of high purity and submicron size by ball-milling LiH with sulfur in an Ar atmosphere at room temperature. By further milling the as-synthesized Li2S with polyacrylonitrile (PAN) followed by carbonization of PAN at 1000 °C, a Li2S/C hybrid with nano-sized Li2S embedded in a mesoporous carbon matrix is achieved. The hybrid with Li2S as high as 74 wt% shows a high initial capacity of 971 mA h g−1 at 0.1C and retains a capacity of 570 mA h g−1 after 200 cycles as a cathode material for LSBs. A capacity of 610 mA h g−1 is obtained at 1C. The synthesis method of Li2S is facile, environmentally benign, and of high output and low cost. The present work opens a new route for the scalable fabrication of submicron-sized Li2S and for the development of high performance Li2S-based cathodes

Complex 3D microfluidic architectures formed by mechanically guided compressive buckling.

Microfluidic technologies have wide-ranging applications in chemical analysis systems, drug delivery platforms, and artificial vascular networks. This latter area is particularly relevant to 3D cell cultures, engineered tissues, and artificial organs, where volumetric capabilities in fluid distribution are essential. Existing schemes for fabricating 3D microfluidic structures are constrained in realizing desired layout designs, producing physiologically relevant microvascular structures, and/or integrating active electronic/optoelectronic/microelectromechanical components for sensing and actuation. This paper presents a guided assembly approach that bypasses these limitations to yield complex 3D microvascular structures from 2D precursors that exploit the full sophistication of 2D fabrication methods. The capabilities extend to feature sizes <5 μm, in extended arrays and with various embedded sensors and actuators, across wide ranges of overall dimensions, in a parallel, high-throughput process. Examples include 3D microvascular networks with sophisticated layouts, deterministically designed and constructed to expand the geometries and operating features of artificial vascular networks

Single nucleotide polymorphisms at the TRAF1/C5 locus are associated with rheumatoid arthritis in a Han Chinese population

<p>Abstract</p> <p>Background</p> <p>Genetic variants in <it>TRAF1C5 </it>and <it>PTPN22 </it>genes have been shown to be significantly associated with arthritis rheumatoid in Caucasian populations. This study investigated the association between single nucleotide polymorphisms (SNPs) in <it>TRAF1/C5 </it>and <it>PTPN22 </it>genes and rheumatoid arthritis (RA) in a Han Chinese population. We genotyped SNPs rs3761847 and rs7021206 at the <it>TRAF1/C5 </it>locus and rs2476601 SNP in the <it>PTPN22 </it>gene in a Han Chinese cohort composed of 576 patients with RA and 689 controls. The concentrations of anti-cyclic citrullinated peptide antibodies (CCP) and rheumatoid factor (RF) were determined for all affected patients. The difference between the cases and the controls was compared using <it>χ</it>²analysis.</p> <p>Results</p> <p>Significant differences in SNPs rs3761847 and rs7021206 at <it>TRAF1/C5 </it>were observed between the case and control groups in this cohort; the allelic p-value was 0.0018 with an odds ratio of 1.28 for rs3761847 and 0.005 with an odds ratio of 1.27 for rs7021206. This significant association between rs3761847 and RA was independent of the concentrations of anti-CCP and RF. No polymorphism of rs2476601 was observed in this cohort.</p> <p>Conclusions</p> <p>We first demonstrated that genetic variants at the <it>TRAF1/C5 </it>locus are significantly associated with RA in Han Chinese, suggesting that <it>TRAF1/C5 </it>may play a role in the development of RA in this population, which expands the pathogenesis role of <it>TRAF1/C5 </it>in a different ethnicity.</p

Hierarchical network modeling with multidimensional information for aquatic safety management in the cold chain

The cold‐chain information has characterized by the loss and dispersion according to the different collecting methods. The description for the quality decay factors of aquatic products can be defined as the multidimensional information. A series of nodes with multidimensional information are assembled to be hierarchies aiming at describing the environment conditions and locations in the supply chain. Each of the single hierarchy levels constitutes a sequence of node information in a network, which is applied as internal information analysis. The cross‐layer information structure is defined as “bridge” information which is able to record the information transmissions among every hierarchy from the point of view of the whole chain. The study has established a novel structured modeling to describe the cold chain of aquatic products based on a network‐hierarchy framework. An organized and sustainable transmission process can be built and recorded by the multidimensional attributes for the whole course of cold chain of aquatic products. In addition, seamless connections among every hierarchy are attainable by the environmental information records continuously to monitor the quality of aquatic products. The quality assessments and shelf life predictions are estimated properly as the risk control in order to monitor and trace the safety of aquatic products under the supply chain perspective